Numerical Simulation of Magnetic Reconnection Driven by the Laser Helmholtz Capacitor-coil Targets     

XU Shan-shan  MEI Zhi-xing  ZHONG Jia-yong  LIN Jun 《Chinese Astronomy and Astrophysics》2021,45(2):131-146

  相似文献   

塔里木盆地南缘8.5 ka以来的黄土岩石磁学特征及其磁化率变化机制          下载免费PDF全文

吕爽  韩文霞  张涛  韩凤清  卢胜城  马学海  张志高 《地球物理学报》2019,62(8):3053-3066

黄土岩石磁学参数是古气候研究中的重要指标，其中磁化率应用最为广泛，并在黄土高原地区取得重大进展，其受控于成壤作用的变化机制也被普遍接受.然而在黄土高原外缘的新疆地区，磁化率的变化机制仍不明确，导致磁化率的古气候意义在该区存在较大争议.本文选取塔里木盆地南缘具有精确年代控制的典型黄土剖面（羊场剖面）开展岩石磁学和高分辨率磁化率研究，利用交叉小波分析方法并结合剖面粒度、矿物及元素特征对该地区磁化率变化机制进行初步探讨.结果显示，羊场剖面的岩石磁学性质主要由粗颗粒软磁性矿物所控制，同时也表现出一定的顺磁性特征.根据载磁矿物和磁化率变化特征可将剖面进一步划分为两个阶段：阶段Ⅰ（8.5~2.5 ka），载磁矿物以亚铁磁性的磁铁矿为主，磁化率值整体较高；阶段Ⅱ（2.5~0.2 ka），亚铁磁性矿物依然占据主导地位，但硬磁性矿物和以黄铁矿为代表的顺磁性矿物相对增多，磁化率值显著降低.相关性研究和交叉小波分析表明：阶段Ⅰ磁化率与粗颗粒组分的变化具有一致性，符合"风速论"模式；阶段Ⅱ磁化率不仅与粗颗粒组分具有明显的正相关关系，而且与指示成壤作用强度的频率磁化率百分含量呈现出显著的负相关关系，暗示了阶段Ⅱ的磁化率变化可能受到"风速论"和"还原性成壤"模式的共同影响.本文拓宽了对新疆地区黄土岩石磁学特征及其磁化率变化机制的深入理解，也为利用磁化率恢复新疆及中亚地区全新世以来的古气候变化历史提供了新的线索.  相似文献   

Fe₃O₄/Mg(OH)₂复合材料的制备及形貌控制          下载免费PDF全文

韩文生  李丽娟  宋富根  时东  张禹泽  李娜  郭凡 《盐湖研究》2020,28(3):93-98

通过种子沉积法制备出Fe_3O_4/Mg(OH)_2复合材料并进行XRD、SEM测试分析。探究了氨水的浓度与加入速度、搅拌速度及等因素对磁性复合材料形貌的影响。氨水浓度与注入速度的降低,对氢氧化镁基体形貌的影响是相同的,但要使合成磁性复合材料形貌和四氧化三铁粒子在氢氧化镁中分散性均匀,应控制氨水浓度(ω=2.5%)或加入速度在一个合理的较低值。  相似文献   

Turbulence Diffusion and Energy Spectrum Analysis of Large-scale Current Sheets in Flares     

《Chinese Astronomy and Astrophysics》2021,45(4):470-493

Magnetic reconnection (MR) is one of the most important physical processes for many dynamical phenomena in the universe. Magnetohydrodynamical (MHD) simulation is an effective way to study the MR process and the physical pictures related to the MR. With different parameter setups, we investigate the influences of the Magnetic Reynolds number and spatial resolution on the reconnection rate, numerical dissipation, and energy spectrum distribution in the MHD simulation. We have found that the magnetic Reynolds number $R_m$ has definite impact on the reconnection rate and energy spectrum distribution. The characteristic time for entering into the non-linear phase will be earlier as the Reynolds number increases. When it comes to the tearing phase, the reconnection rate will increase rapidly. On the other hand, the magnetic Reynolds number affects significantly the Kolmogorov microscopic scale $l_{\mathit{ko}}$, which becomes smaller as $R_m$ increases. An extra dissipation is defined as the combined effect of the numerical diffusion and turbulence dissipation. It is shown that the extra dissipation is dominated by the numerical diffusion before the tearing mode instability takes place. After the instability develops, the extra dissipation rises vastly, which indicates that turbulence caused by the instability can enhance the diffusion obviously. Furthermore, the energy spectrum analysis indicates that $l_{\mathit{ko}}$ of the large-scale current sheet may appear at a macroscopic MHD scale very possibly.  相似文献   

亚热带地区发育于不同母岩风化壳上的红壤磁学特征对比及其环境意义   总被引：1，自引：0，他引：1       下载免费PDF全文

郑兴芬  吕镔  陈梓炫  马兴悦  赵国永 《地球物理学报》2019,62(9):3509-3523

本研究对发育于亚热带地区花岗岩和变质岩风化壳之上的两个红壤剖面进行了系统的环境磁学测量及色度分析，探讨在同一地区不同母质上发育的红壤磁性差异的原因及其环境意义.研究区的两个剖面分别位于福建省南平市高铁北站和纺织厂附近，相距约15 km，气候条件基本相同.研究结果表明：（1）较强磁性的花岗岩母质层上发育的南平北站红壤（NPN），在发育过程因母质层中多畴（MD）颗粒磁赤铁矿化的磁铁矿溶解，剖面上部的淋溶层和淀积层虽以较细的稳定单畴（SSD）颗粒和少量的假单畴（PSD）颗粒磁铁矿为主，但剖面磁性自下而上减弱.相较而言，南纺红壤（NF）剖面发育在磁性较弱的变质砂岩上，其过渡层和母质层以赤铁矿为主，因成壤过程中生成较细的超顺磁（SP）磁铁矿使得土壤淋溶层和淀积层磁性增强；说明母质不同是亚热带地区红壤磁性差异的主要原因.（2） NPN和NF两个剖面的气候条件基本相同，磁性差异比色度指标差异更为显著.亚热带地区因剖面受母质影响显著，整体磁性特征不能反映气候；黄度和红度的比值（b^*/a^*）远小于磁性的差异，说明针铁矿和赤铁矿的比值更能反映研究区的平均气候状况，即反映次生磁性矿物含量的参数为更适合的气候指标.  相似文献   

基于等效源的总强度磁异常非线性处理方法          下载免费PDF全文

孙石达  杜劲松  陈超  李端 《地球物理学报》2020,63(1):351-361

总强度磁异常(ΔT1)常规处理方法通常将其近似当作磁异常矢量在地磁正常场方向上的投影(ΔT2).然而对于高磁环境如磁铁矿处的磁异常场幅值可达104 nT甚至更大的情况,上述近似假设则不再成立,如采用常规处理方法可能会带来明显的误差.本文针对该问题,提出一种基于等效源的总强度磁异常非线性处理方法;该方法根据总强度磁异常获取流程,直接反演实测地磁场总强度幅值与正常场强度幅值之差来求取等效场源.本文首先通过模型试验,分析ΔT1与ΔT2的差异;然后将ΔT1当作ΔT2采用常规处理方法以及ΔT1采用新方法得到的结果作对比分析,结果表明新方法处理结果与理论值的差异为常规方法处理结果的1/5甚至更小,充分说明了新方法的有效性;最后将该方法应用于铁矿实测总强度磁异常处理实例中来转换计算磁异常总模量,其实际应用效果进一步体现了高幅值总强度磁异常数据处理过程中采用新方法的必要性.  相似文献   

藏南泽当地区大反向逆冲断层变形研究——以磁组构与EBSD组构分析为例     

曹新文  孙知明  黄宝春  曹勇  裴军令  叶小舟  刘思琪 《岩石学报》2021,37(10):3167-3184

仁布-泽当逆冲断层是喜马拉雅大反向逆冲断层（GCT）在藏南地区的重要延伸部分,也是喜马拉雅造山带北部边界新生代最为活动的构造单元之一。新生代以来特提斯喜马拉雅的构造变形组构特征的研究对于深入理解碰撞造山带演化与高原隆升具有重要构造意义。本文综合GCT泽当-琼结段断层的宏观与微观变形特征,对断裂带石英脉、围岩中石英和云母矿物的电子背散射（EBSD）组构及断层两侧岩石磁组构（AMS）特征进行对比分析。结果表明对AMS主要贡献来自顺磁性云母、绿泥石等,磁化率各向异性椭球体以压扁状为主,磁面理与构造面理（劈理、断层面）基本重合,显示较强的构造变形磁组构特征;磁线理优选方向近南北向,且与观测北向逆冲断层方向一致,揭示剪切作用在变形过程中的持续作用。研究发现泽当地区GCT附近石英微观结构从围岩至断层区,石英至少呈现3种不同类型的微观变形机制：围岩区溶解蠕变、断裂带石英以膨凸重结晶和亚颗粒旋转重结晶作用为主。断裂带石英的c轴EBSD组构指示变形为低温（300~400℃）环境,其中黑云母的结晶学优选（CPO）与磁组构主轴优选方向存在高度的一致性,进一步证实了顺磁性矿物黑云母对AMS的主要贡献。综合研究表明泽当地区GCT的韧性变形是断层处在中上地壳韧性带的活动阶段变形的结果,也代表了特提斯喜马拉雅在碰撞、高原隆升期的变形主要特征。  相似文献   

Research achievements of the Qinghai-Tibet Plateau based on 60 years of aeromagnetic surveys     

《China Geology》2021,4(1):147-177

The Qinghai-Tibet Plateau (also referred to as the Plateau) has long received much attention from the community of geoscience due to its unique geographical location and rich mineral resources. This paper reviews the aeromagnetic surveys in the Plateau in the past 60 years and summarizes relevant research achievements, which mainly include the followings. (1) The boundaries between the Plateau and its surrounding regions have been clarified. In detail, its western boundary is restricted by West Kunlun-Altyn Tagh arc-shaped magnetic anomaly zone forming due to the arc-shaped connection of the Altyn Tagh and Kangxiwa faults and its eastern boundary consists of the boundaries among different magnetic fields along the Longnan (Wudu)-Kangding Fault. Meanwhile, the fault on the northern margin of the Northern Qilian Mountains serves as its northern boundary. (2) The Plateau is mainly composed of four orogens that were stitched together, namely East Kunlun-Qilian, Hoh-Xil-Songpan, Chamdo-Southwestern Sanjiang (Nujiang, Lancang, and Jinsha rivers in southeastern China), and Gangdese-Himalaya orogens. (3) The basement of the Plateau is dominated by weakly magnetic Proterozoic metamorphic rocks and lacks strongly magnetic Archean crystalline basement of stable continents such as the Tarim and Sichuan blocks. Therefore, it exhibits the characteristics of unstable orogenic basement. (4) The Yarlung-Zangbo suture zone forming due to continent-continent collisions since the Cenozoic shows double aeromagnetic anomaly zones. Therefore, it can be inferred that the Yarlung-Zangbo suture zone formed from the Indian Plate subducting towards and colliding with the Eurasian Plate twice. (5) A huge negative aeromagnetic anomaly in nearly SN trending has been discovered in the middle part of the Plateau, indicating a giant deep thermal-tectonic zone. (6) A dual-layer magnetic structure has been revealed in the Plateau. It consists of shallow magnetic anomaly zones in nearly EW and NW trending and deep magnetic anomaly zones in nearly SN trending. They overlap vertically and cross horizontally, showing the flyover-type geological structure of the Plateau. (7) A group of NW-trending faults occur in eastern Tibet, which is intersected rather than connected by the nearly EW trending that develop in middle-west Tibet. (8) As for the central uplift zone that occurs through the Qiangtang Basin, its metamorphic basement tends to gradually descend from west to east, showing the form of steps. The Qiangtang Basin is divided into the northern and southern part by the central uplift zone in it. The basement in the Qiangtang Basin is deep in the north and west and shallow in the south and west. The basement in the northern Qiangtang Basin is deep and relatively stable and thus is more favorable for the generation and preservation of oil and gas. Up to now, 19 favorable tectonic regions of oil and gas have been determined in the Qiangtang Basin. (9) A total of 21 prospecting areas of mineral resources have been delineated and thousands of ore-bearing (or mineralization) anomalies have been discovered. Additionally, the formation and uplift mechanism of the Plateau are briefly discussed in this paper.©2021 China Geology Editorial Office.  相似文献   

An experimental study of effect of pre‐existing fabric on deformation of foliated mylonite at high temperature and pressure     

Gui Liu  Yongsheng Zhou  Changrong He  Wenming Yao  Junlai Liu  Yuanyuan Zhang 《Geological Journal》2016,51(1):92-112

We performed deformation experiments on a foliated mylonite under high temperature and pressure conditions in this study. To investigate the effect of pre‐existing fabric on the rheology of rocks, our samples were drilled from natural mylonite with the cylinder axis parallel to the foliation (PAR) and perpendicular to the foliation (PER). We performed 25 tests on seven PAR samples and 21 tests on seven PER samples at temperatures ranging from 600 to 890 °C, confining pressures ranging from 800 to 1400 MPa, and steady‐state strain rates of 1 × 10⁻⁴, 1 × 10⁻⁵ and 2.5 × 10⁻⁶ s⁻¹. In the temperatures of 600–700 °C, the deformation is accommodated by semi‐brittle flow, with the average stress exponent being 6–7 assuming power law flow; in the temperature range of 800–890 °C, deformation is mainly by plastic flow, with an average stress exponent of n = 3 and activation energies of Q = 354 ± 52 kJ/mol (PER and PAR samples). The experimental results show that the strengths of PER samples are higher than those of PAR samples. Deformation microstructures have been studied by optical and electron microscopy. The original foliation of PER samples is destroyed by deformation and replaced by a new foliation, but the deformation of PAR samples followed the original foliation. Electron backscatter diffraction (EBSD) measurements show a strong lattice preferred orientation (LPO) of the quartz c axis fabrics of the starting samples and deformed PER and PAR samples. However, the c axis fabric of quartz in experimentally deformed PER and PAR samples varied with temperature and strain rate is different from that seen in the starting mylonite sample. The initial quartz c axis fabric of the starting mylonite sample has been transformed into a new fabric during experimental deformation. Dehydration melting of biotite and hornblende occurred in both PER and PAR samples at temperatures of 800–890 °C. Copyright © 2014 John Wiley & Sons, Ltd.  相似文献   

山西榆社盆地新近系马会组砾岩层砾组特征及其地质意义   总被引：2，自引：1，他引：1  

钱程  韩建恩  余佳  贺承广  朱大岗  孟宪刚  邵兆刚  王津 《现代地质》2011,25(4):778-788

通过对山西榆社盆地新近系中新统马会组砾岩层的分布特征、剖面特征和砾组特征分析,结合盆地内部和四周山区的岩性特征分析,阐述了砾岩层本身的性质、成因、来源和搬运方式等,探讨砾石沉积时盆地的水动力条件、气候环境、地貌特征和构造条件等。研究表明,马会组砾岩层为榆社盆地新近纪河湖相沉积的底砾岩,其中所含的3层砾岩在成因、来源、搬运和沉积环境上具有较好的一致性。马会组砾岩层为多期次、多来源、非稳定的冲湖积成因,为湖泊水进期的沉积物,指示干冷向温湿转变的气候环境;砾石的主要来源是盆地内部的基底地层及其东缘、北缘和西缘的山区;砾石遭受了较强的物理化学作用,还存在一定的生物作用;含量较少的花岗岩砾石经受了较长距离的搬运,其他岩性砾石经受了近—中距离的搬运。榆社盆地为喜马拉雅运动二幕晋东地区山地相对抬升形成的山间盆地,砾石沉积时已形成了中间低、四周高的盆地雏形。  相似文献